BNDJJ - 1084, BISMUTH
- MSDS: BNDJJ
- Manufacturer: J T BAKER INC
- Product Name: 1084, BISMUTH
- National Stock Number: 6810-00N029577
Product Identification
Product ID:1084, BISMUTH
MSDS Date:05/01/1989
FSC:6810
NIIN:00N029577
MSDS Number: BNDJJ
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 201-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
BISMUTH
CAS: 7440-69-9
RTECS: EB2600000
Fraction By Weight: 99-100%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/EYE/INGEST/SKIN
ABSORPTION: NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST: IMMED GIVE LG AMOUNTS OF WATER. GET MED ATTN. INHAL:
REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTF RESP. IF BREATHING
IS DIFFICULT, GIVE O2. SKIN: FLUSH WITH WATER. EYES: IMMED FLUSH
WITH P LENTY OF WATER FOR AT LEAST 15 MIN.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. SHUT OFF
IGNITION SOURCES; NO FLARES, SMOKING, OR FLAMES IN AREA. WITH CLEAN
SHOVEL, CAREFULLY PLACE MATERIAL INTO CLEAN, DRY CONTAINER AND
COVER; REMOVE FROM AREA. FLUSH SPILL AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN COOL, DRY, WELL-VENTILATED AREA AWAY FROM HEAT, SPARKS, OR
FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE NIOSH/MSHA
APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQ GEN/LOC EXHAUST VENT TO KEEP FUME OR DUST LEVELS
AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:2588F,1420C
Melt/Freeze Pt:M.P/F.P Text:519F,271C
Spec Gravity:9.70(H2O=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:SILVER METAL, ODORLESS.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG OXIDIZING AGENTS, CHLORINE, FUSED AMMONIUM
NITRATE, NITROSYL FLUORIDE, IODINE PENTAFLUORIDE.
Stability Condition to Avoid:HEAT, FLAME, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:NONE IDENTIFIED.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.